Development of a novel hollow‐fiber liquid‐phase microextraction based on oil‐in‐salt and its comparison with conventional one

A novel hollow‐fiber liquid‐phase microextraction based on oil‐in‐salt was proposed and introduced for the simultaneous extraction and enrichment of the main active compounds of hesperidin, honokiol, shikonin, magnolol, emodin, and β,β′‐dimethylacrylshikonin in a formula of Zi‐Cao‐Cheng‐Qi decoction and the single herb, Fructus Aurantii Immaturus , Cortex Magnoliae Officinalis , Radix et Rhizoma , and Lithospermum erythrorhizon , composing the formula prior to their analysis by high‐performance liquid chromatography. The results obtained by the proposed procedure were compared with those obtained by conventional hollow‐fiber liquid‐phase microextraction, and the proposed procedure mechanism was described. In the procedure, a hollow‐fiber segment was first immersed in organic solvent to fill the solvent in the fiber lumen and wall pore, and then the fiber was again immersed into sodium chloride solution to cover a thin salt membrane on the fiber wall pore filling organic solvent. Under the optimum conditions, the enrichment factors of the analytes were 0.6–109.4, linearities were 0.002–12 μg/mL with r ² ≥ 0.9950, detection limits were 0.6–12 ng/mL, respectively. The results showed that oil‐in‐salt hollow‐fiber liquid‐phase microextraction is a simple and effective sample pretreatment procedure and suitable for the simultaneous extraction and concentration of trace‐level active compounds in traditional Chinese medicine.     

Application of a dispersive solid‐phase extraction method using an amino‐based silica‐coated nanomagnetic sorbent for the trace quantification of chlorophenoxyacetic acids in water samples

Herein, an amino‐based silica‐coated nanomagnetic sorbent was applied for the effective extraction of two chlorophenoxyacetic acids (2‐methyl‐4‐chlorophenoxyacetic acid and 2,4‐dichlorophenoxyacetic acid) from various water samples. The sorbent was successfully synthesized and subsequently characterized by scanning electron microscopy, X‐ray diffraction, and Fourier‐transform infrared spectroscopy. The analytes were extracted by the sorbent mainly through ionic interactions. Once the extraction of analytes was completed, they were desorbed from the sorbent and detected by high‐performance liquid chromatography with ultraviolet detection. A number of factors affecting the extraction and desorption of the analytes were investigated in detail and the optimum conditions were established. Under the optimum conditions, the calibration curves were linear over the concentration range of 1–250, and based on a signal‐to‐noise ratio of 3, the method detection limits were determined to be 0.5 μg/L for both analytes. Additionally, a preconcentration factor of 314 was achieved for the analytes. The average relative recoveries obtained from the fortified water samples varied in the range of 91–108% with relative standard deviations of 2.9–8.3%. Finally, the method was determined to be robust and effective for environmental water analysis.     

Dispersive admicelle solid‐phase extraction based on sodium dodecyl sulfate coated Fe3O4 nanoparticles for the selective adsorption of three alkaloids in Gegen‐Qinlian oral liquid before high‐performance liquid chromatography

A novel dispersive admicelle solid‐phase extraction method based on sodium dodecyl sulfate‐coated Fe₃O₄ nanoparticles was developed for the selective adsorption of berberine, coptisine, and palmatine in Gegen‐Qinlian oral liquid before high‐performance liquid chromatography. Fe₃O₄ nanoparticles were synthesized by a chemical coprecipitation method and characterized by using transmission electron microscopy. Under acidic conditions, the surface of Fe₃O₄ nanoparticles was coated with sodium dodecyl sulfate to form a nano‐sized admicelle magnetic sorbent. Owing to electrostatic interaction, the alkaloids were adsorbed onto the oppositely charged admicelle magnetic nanoparticles. The quick separation of the analyte‐adsorbed nanoparticles from the sample solution was performed by using Nd‐Fe‐B magnet. Best extraction efficiency was achieved under the following conditions: 800 μL Fe₃O₄ nanoparticles suspension (20 mg/mL), 150 μL sodium dodecyl sulfate solution (10 mg/mL), pH 2, and vortexing time 2 min for the extraction of alkaloids from 10 mL of diluted sample. Four hundred microliters of methanol was used to desorb the alkaloids by vortexing for 1 min. Satisfactory extraction recoveries were obtained in the range of 85.9–120.3%, relative standard deviations for intra‐ and interday precisions were less than 6.3 and 10.0%, respectively. Finally, the established method was successfully applied to analyze the alkaloids in two batches of Gegen‐Qinlian oral liquids.     

Chiral separation of novel diazenes on a polysaccharide‐based stationary phase in the reversed‐phase mode

Chiral high‐performance liquid chromatography separation of two recently synthesized liquid crystalline materials C1 and C2 was studied in the reversed‐phase mode. Both materials have an azo‐moiety and one chiral center in their molecular structures. They were available in racemic and pure S forms. For the enantiomeric separations, a Chiralpak AY‐RH stationary phase based on amylose tris(5‐chloro‐2‐methylphenylcarbamate) coated on 5 μm silica was used. The compounds were analyzed in both of their possible forms, the more thermodynamically stable E form and the labile Z form. The conditions and time scale of the UV‐induced E to Z transition were briefly evaluated. Under the optimized conditions, we were able to baseline separate S and R enantiomers of both of the studied materials not only in their E forms, but also in their Z forms. In comparison to the separation in the normal‐phase mode, which we have reported recently, the resolution in the reversed‐phase mode is significantly better. Interestingly, peak reversal was noticed for the S and R enantiomers when the separation was carried out with E versus Z forms of both compounds.     

Analysis of microcystins using high‐performance liquid chromatography and magnetic solid‐phase extraction with silica‐coated magnetite with cetylpyridinium chloride

Microcystins (MCs), produced by freshwater cyanobacteria, can be serious water pollutants, so it is important to monitor their concentration in drinking water. We have developed a method for rapid and accurate determination of microcystin levels in environmental water, using magnetic solid‐phase extraction and high‐performance liquid chromatography with UV detection. The magnetic composite material, which was combined with cetylpyridinium chloride, was prepared by hydrothermal synthesis. The optimal extraction of microcystins in water sample was achieved by optimizing the amount of adsorbent, time of adsorption, ratio of eluting solvent, and volume of eluent. Under the optimal conditions, the limit of detection of MC‐LR was 0.001 μg/L, and the limit of quantification was 0.0028 μg/L. The limit of detection of MC‐RR was 0.001 μg/L, and the limit of quantification was 0.003 μg/L. These values are far lower than those established by the International Health Organization for the maximum concentration of microcystins in drinking water. The magnetic solid‐phase extraction adsorbent used in this method has the advantages of simple preparation, low price, and easy solid–liquid separation, and it can be used for the rapid and sensitive monitoring of trace microcystins in environmental water samples.     

Simultaneous determination of pyrametostrobin and its two metabolites in cucumber and soil using a quick,easy, cheap,effective, rugged,and safe method with HPLC–MS/MS

An easy, effective and sensitive analytical method for the simultaneous determination of a novel fungicide pyrametostrobin and its two metabolites pyrametostrobin‐M1 and pyrametostrobin‐M2 in cucumber and soil was developed using a quick, easy, cheap, effective, rugged, and safe method with high‐performance liquid chromatography and tandem mass spectrometry. The extraction solvent was acetonitrile, and cleanup sorbents were primary secondary amine and graphitized carbon black for cucumber samples and primary secondary amine for soil samples. The three target compounds were successfully separated between 3.2 and 3.9 min using a Waters CORTECS™ C₁₈ column connected to an electrospray ionization source. All the matrix‐matched samples at three fortified levels (10, 100 and 1000  μg/kg) provided satisfactory recoveries in the range of 78.8–93.8% with relative standard deviations below 6.9%. The limits of quantitation for the three compounds were below 0.183 μg/kg. The proposed method was validated by analyzing real samples.     

Preparation of magnetic mesoporous silica composite for the solid‐phase microextraction of diazinon and malathion before their determination by high‐performance liquid chromatography

A novel magnetic mesoporous silica material was synthesized and used as the sorbent for the magnetic solid‐phase microextraction of diazinon and malathion before their quantification by high‐performance liquid chromatography with UV detection. The sorbent was synthesized by a surfactant‐templated one‐pot sol–gel procedure using SiO₂‐coated Fe₃O₄ as the magnetic support, cetyltrimethylammonium bromide as the template and tetraethyl orthosilicate as the silicon source. The characteristics of the prepared sorbent were investigated using Fourier transform infrared spectroscopy, scanning electron microscopy, and X‐ray diffraction. The sorbent exhibited a high maximum adsorption capacity of 19.2 and 9.4 mg/g for diazinon and malathion, respectively. The parameters affecting the microextraction were optimized by the MultiSimplex method. Under the optimized conditions, the calibration graphs were linear in the concentration ranges of 0.3–50.0 and 0.5–50 μg/L with the limits of detection of 0.09 and 0.14 μg/L for diazinon and malathion, respectively. The relative standard deviations (n = 5) at a concentration level of 10.0 μg/L of analytes were less than 2.5 and 4% for intra and interday, respectively. The developed method was successfully used for the determination of diazinon and malathion in apple, tomato, cucumber, tap water, and well water samples.     

Comparison of ultra high performance supercritical fluid chromatography,ultra high performance liquid chromatography,and gas chromatography for the separation of synthetic cathinones

A comparison of ultra high performance supercritical fluid chromatography, ultra high performance liquid chromatography, and gas chromatography for the separation of synthetic cathinones has been conducted. Nine different mixtures of bath salts were analyzed in this study. The three different chromatographic techniques were examined using a general set of controlled synthetic cathinones as well as a variety of other synthetic cathinones that exist as positional isomers. Overall 35 different synthetic cathinones were analyzed. A variety of column types and chromatographic modes were examined for developing each separation. For the ultra high performance supercritical fluid chromatography separations, analyses were performed using a series of Torus and Trefoil columns with either ammonium formate or ammonium hydroxide as additives, and methanol, ethanol or isopropanol organic solvents as modifiers. Ultra high performance liquid chromatographic separations were performed in both reversed phase and hydrophilic interaction chromatographic modes using SPP C18 and SPP HILIC columns. Gas chromatography separations were performed using an Elite‐5MS capillary column. The orthogonality of ultra high performance supercritical fluid chromatography, ultra high performance liquid chromatography, and gas chromatography was examined using principal component analysis. For the best overall separation of synthetic cathinones, the use of ultra high performance supercritical fluid chromatography in combination with gas chromatography is recommended.     

Enantioseparation characteristics of the chiral stationary phases based on natural and regenerated chitins

Natural and regenerated chitins were derivatized with 3,5‐dimethyphenyl isocyanate. The corresponding chiral stationary phases were prepared by coating the resulting chitin derivatives on 3‐aminopropyl silica gel. The swelling capacity of the chitin derivatives, enantioseparation capability, as well as eluents tolerance of the chiral stationary phases were evaluated. The results demonstrated no remarkable difference in enantioseparation capability between natural and regenerated chitins based chiral stationary phases. The similar enantioseparation characteristics of two chiral stationary phases could be understood by comparing the IR spectra of related chitin derivatives. The one of the two chiral stationary phases prepared by coating the chitin derivative with a lower molecular weight generally provided better enantioseparations. All chiral stationary phases can work in 100% chloroform, 100% ethyl acetate, 100% acetone, and the mobile phases containing a certain amount of tetrahydrofuran. The chiral stationary phase prepared from the chitin derivative with the highest swelling capacity exhibited better enantioseparations than others. This chiral stationary phase was damaged by flushing with 100% tetrahydrofuran, however, the enantioseparation capability was recovered again after the column was allowed to stand for 1 month. Furthermore, the recovered chiral stationary phase provided better enantioseparations for some chiral analytes than before.     

Multiconstituent identification in root,branch, and leaf extracts of Juglans mandshurica using ultra high performance liquid chromatography with quadrupole time‐of‐flight mass spectrometry

As a traditional medicinal plant, Juglans mandshurica has been used for the treatment of cancer. Different organs of this plant showed anti‐tumor activity in clinic and laboratory. Comparative identification of constituents in different plant organs is essential for investigation of the relationship between chemical constituents and pharmacological activities. For this aim, the roots, branches, and leaves of J. mandshurica were extracted with 50% v/v methanol and then subjected to ultra‐high performance liquid chromatography with quadrupole time‐of‐flight mass spectrometry analysis conducted under low and high energy. As a result, we have to date identified 111 compounds consisting of 56 tannins, 29 flavonoids, 13 organic acids, 8 naphthalene derivatives, and 5 anthracenes. Five compounds, namely, diquercetin trihydroxy‐truxinoyl‐glucoside, two quercetin kaempferol dihydroxy‐truxinoyl‐glucosides, syringoyl‐tri‐galloyl‐O‐glucose, and dihydroxy‐naphthalene syringoyl‐glucoside, were tentatively identified as new compounds. Of the compounds identified, 76 were found in the root extract, 67 in the branch extract, and 37 in the leaf extract. Only six compounds including four organic acids and two tannins were found in all three extracts. We developed a rapid and sensitive ultra high performance liquid chromatography with quadrupole time‐of‐flight mass spectrometry approach to identify multiple constituents of complex extracts without separation and ion selection. The results presented provide useful information on further research of the bioactive compounds of J. mandshurica .